RED ROCK OD/ROD-1

Regular price ¥11,980

Tax included. Shipping calculated at checkout.
It features sticky and warm distortion, and expresses the guitarist's emotions as they are. It is especially compatible with guitars with single coil pickups. The volume of the input gain section allows you to correct or boost the level due to differences in guitar pickups. Equipped with a FAT switch for a thicker sound.

Warm drive sound that matches single coils <br>Featuring extremely sticky warm distortion, it expresses the guitarist's emotions as they are. It is especially compatible with guitars with single coil pickups.

Possible to correct levels due to differences in pickups <br>Similar to amplifier circuits, the volume of the input gain section can be used to correct or boost levels due to differences in guitar pickups.

FAT Switch Equipped with a FAT switch that boosts the low range for a thicker sound.

Overdrive sound with a wide dynamic range <br>The internal operating voltage has been boosted from 9V to 18V, ensuring a wide dynamic range and combining comfortable sound clarity, room, and a deep sense of range.

SCT circuit <br>In a normal True-Bypass circuit, the audio signal passes through two switch circuits when bypassed, but the RED ROCK OD circuit is a single contact true bypass circuit where the audio signal passes through only one switch circuit when bypassed. We are hiring. The result is improved product reliability and higher sound quality than ever before.

DCG Circuit A DCG circuit (double contact grounding circuit) is used that connects the ground side of the effector with two contacts to the shield side of the mono plug connected to the output jack. By increasing the area of ​​the contact points, poor contact is less likely to occur, which is advantageous in terms of sound quality.

LED multi-function
RED ROCK OD's LED not only indicates the ON/OFF status of the effect, but also has the function of monitoring the battery voltage. When the battery voltage drops below approximately 7V, the LED will begin to turn off. Although the effect sound will still be output in this state, we recommend replacing the battery in order to fully utilize the performance of this unit.