This is an analog chorus tuned specifically for bass using a BBD delay element. It supports chorus sounds in a variety of situations, such as thick bass phrases, chord plays that use a wide range, and high-pitched solos. You can change the depth of the sound with the 3-stage DEEP (mode) switch.
Rich chorus effect
ANADIME BASS CHORUS/ABC-1 is an analog chorus tuned specifically for bass using a BBD delay element. It supports chorus sounds in a variety of situations, such as thick bass phrases, chord plays that use a wide range, and high-pitched solos.
DEEP switch enables a wider range of sound creation
The DEEP (mode) switch has 3 levels, allowing you to change the depth of the sound.
Equipped with HPF/high pass filter
High Pass Filter/HPF can control the degree of vibration in the low frequency range. Even when a deep chorus is applied, the pitch of the bass range can be stabilized by operating the HPF.
DCG Circuit A DCG circuit (double contact grounding circuit) is used that connects the ground side of the effector with two contacts to the shield side of the mono plug connected to the output jack. By increasing the area of the contact points, poor contact is less likely to occur, which is advantageous in terms of sound quality.
LED multi-function
The ANADIME BASS CHORUS LED functions as a modulation pitch display (when the effect is on, it flashes in sync with the LFO speed, so you can visually check it). In addition to displaying the ON/OFF status of effects, it also has the ability to monitor battery voltage. When the battery voltage drops below approximately 7V, the LED will begin to turn off. Although the effect sound will still be output in this state, we recommend replacing the battery in order to fully utilize the performance of this unit.
Rich chorus effect
ANADIME BASS CHORUS/ABC-1 is an analog chorus tuned specifically for bass using a BBD delay element. It supports chorus sounds in a variety of situations, such as thick bass phrases, chord plays that use a wide range, and high-pitched solos.
DEEP switch enables a wider range of sound creation
The DEEP (mode) switch has 3 levels, allowing you to change the depth of the sound.
Equipped with HPF/high pass filter
High Pass Filter/HPF can control the degree of vibration in the low frequency range. Even when a deep chorus is applied, the pitch of the bass range can be stabilized by operating the HPF.
DCG Circuit A DCG circuit (double contact grounding circuit) is used that connects the ground side of the effector with two contacts to the shield side of the mono plug connected to the output jack. By increasing the area of the contact points, poor contact is less likely to occur, which is advantageous in terms of sound quality.
LED multi-function
The ANADIME BASS CHORUS LED functions as a modulation pitch display (when the effect is on, it flashes in sync with the LFO speed, so you can visually check it). In addition to displaying the ON/OFF status of effects, it also has the ability to monitor battery voltage. When the battery voltage drops below approximately 7V, the LED will begin to turn off. Although the effect sound will still be output in this state, we recommend replacing the battery in order to fully utilize the performance of this unit.