It is possible to control the level of the low-impedance sound created by the previous VITALIZER® circuit up to a maximum of 20 dB (approximately 10 times higher in terms of hearing). Using a unique switching method that turns only the BOOST volume function ON/OFF and always passes through the boost circuit, the design is such that the tone will hardly change even when boosted significantly.
●VITALIZER®
VITALIZER® is a buffer amplifier that converts high-impedance electrical signals that are easily affected by noise and changes in sound quality caused by plug/jack contacts and long cables into low-impedance signals that are less susceptible to such effects. This Active Impedance Converter is a type of Active Impedance Converter that uses Providence's unique ingenuity to avoid becoming too Hi-Fi, taking into account the signal characteristics of musical instruments such as guitars/bass and effectors. It outputs a natural signal that minimizes the so-called "active odor" and is as faithful as possible to the original sound unique to musical instruments. Since VITALIZER® FB passes through the VITALIZER® circuit even when the effect is off, it sends a lively signal to the equipment connected to the rear.
●FINAL BOOSTER(FB)
FINAL BOOSTER is a full range booster that emphasizes sound quality. It is possible to control the level of the low-impedance sound created by the previous VITALIZER® circuit up to a maximum of 20 dB (approximately 10 times higher in terms of hearing). Using a unique switching method that turns only the BOOST volume function ON/OFF and always passes through the boost circuit, the design is such that the tone will hardly change even when boosted significantly.
●Effective usage
VITALIZER® is particularly effective when used in areas where you want to minimize changes in sound quality. It can be used in a variety of ways, such as at the point closest to the guitar, in front of the volume pedal or wah pedal, where sound quality tends to deteriorate, or at the final stage of the system that sends the signal to the amplifier. Taking advantage of the FINAL BOOSTER's characteristic that there is little change in tone even when boosted, you can connect it after another effector to boost only the volume, or connect it before a distortion effector and control the amount of distortion with the amount of boost. is also possible.
*Please note that if you use it before a wah pedal or other effects, too much boost may distort the sound.
●VITALIZER®
VITALIZER® is a buffer amplifier that converts high-impedance electrical signals that are easily affected by noise and changes in sound quality caused by plug/jack contacts and long cables into low-impedance signals that are less susceptible to such effects. This Active Impedance Converter is a type of Active Impedance Converter that uses Providence's unique ingenuity to avoid becoming too Hi-Fi, taking into account the signal characteristics of musical instruments such as guitars/bass and effectors. It outputs a natural signal that minimizes the so-called "active odor" and is as faithful as possible to the original sound unique to musical instruments. Since VITALIZER® FB passes through the VITALIZER® circuit even when the effect is off, it sends a lively signal to the equipment connected to the rear.
●FINAL BOOSTER(FB)
FINAL BOOSTER is a full range booster that emphasizes sound quality. It is possible to control the level of the low-impedance sound created by the previous VITALIZER® circuit up to a maximum of 20 dB (approximately 10 times higher in terms of hearing). Using a unique switching method that turns only the BOOST volume function ON/OFF and always passes through the boost circuit, the design is such that the tone will hardly change even when boosted significantly.
●Effective usage
VITALIZER® is particularly effective when used in areas where you want to minimize changes in sound quality. It can be used in a variety of ways, such as at the point closest to the guitar, in front of the volume pedal or wah pedal, where sound quality tends to deteriorate, or at the final stage of the system that sends the signal to the amplifier. Taking advantage of the FINAL BOOSTER's characteristic that there is little change in tone even when boosted, you can connect it after another effector to boost only the volume, or connect it before a distortion effector and control the amount of distortion with the amount of boost. is also possible.
*Please note that if you use it before a wah pedal or other effects, too much boost may distort the sound.